Glove Box, Literature, Products

The Effect of Gap Size On Vacuum Pump Unit

During the use of the vacuum pump unit, the size of the gap will have a more obvious impact on the function of the product. When it is severe, the equipment will not work normally. What are the reasons for this problem and what specific impact will it cause?

  1. For axial single-effect pumps, the axial gap refers to the end gap between the impeller and the pump body. It can be seen that when the gap exceeds a certain value, the relative pumping time required by the pump with the same axial gap is related to the required vacuum degree. For the same vacuum degree, the relative pumping time varies with the addition of the axial gap.
  2. The gap of the vacuum pump unit is the effect of volume loss or volume power on the pump function. Take a single-effect water circle vacuum pump as an example to illustrate the regularity of this effect. The gap of the water circle vacuum pump is divided into radial gap and axial gap.

After installing the vacuum pump unit, it is recommended to carefully check whether the gap running-in of each component meets the requirements, so as to avoid excessive gaps that may cause the unit to function abnormally and even cause greater damage to the unit.

View more quality glove boxes with low price and free shipping all over the world.

Related Posts