Worldwide shipping
Shipping & Returns
Quality assured
Find retail locations
Expert support
For All Your Questions
Fast and secure
For All Your Questions
MSK-AFA-EI300 Intermittent Experimental Coating Machine
Product introduction:
MSK-AFA-EI300 batch type experimental coating machine is a three-roller transfer coating equipment that can perform continuous and intermittent coating, which is convenient to apply to equipment for surface coating of various substrates. Especially used in the lithium-ion battery industry, this device is designed for the convenience of researchers, and at the same time meets the requirements of coating accuracy and consistency, which is no different from production. It has excellent drying effect. Ideal for secondary battery development and pilot testing.
Factory Price, Hige Quality
Description
Features:
Three-roller transfer coating with wide coating window;
Comma blade measurement, combined with precision adjustment mechanism, to obtain high coating accuracy;
With stirring tank, can be switched freely to achieve continuous and intermittent coating;
Closed-loop tension control of the substrate, stable transport, rewinding configuration correction device;
Hot-air oven with double-sided blowing on the top and bottom for superior drying effect;
PLC control, HMI operation, convenient and easy to use;
Optional solvent recovery processing device;
Technical Parameters
| Powder | Voltage single-phase AC220V ± 10% (customizable 110VAC), frequency 50Hz / 60Hz, power 5KW |
| Gas source | 0.5-0.8Mpa compressed air |
| Use environment | Recommended ambient temperature 25 ± 3 ℃, humidity 30 ~ 90RH, no vibration and electromagnetic interference |
| Coating type | 800VA |
| Guide roller width | 0~800W adjustable |
| Coating width | 40KHz±10% |
| Mechanical speed | Standard welding mold area: 4 * 4MM comes standard with two sets of welding head welding seats, (used for lithium battery cell positive and negative electrode ear welding) |
| Coating accuracy | For welding pure aluminum strip 0.10mm + pure aluminum foil 0.012-0.018mm within 20 layers |
| Coating thickness | Used for welding pure nickel strip 0.10mm + copper foil 0.012-0.018mm within 20 layers |
| Thickness adjustment | Working part :510*220*290mm; 20*8.7*11.4 inch; Control box :500*190*380mm; 19.7* 7.5*15 inch |
| Coating length | Single piece Max.5000mm, blank 10 ~ 100mm, accuracy ± 0.5mm |
| Drying unit | About standard equipped with hot air drying (customizable infrared drying and UV curing), single section 800mm(31.5 inch) long |
| Drying temperature | Max. 150±5℃，Can be set |
| Tension control | Max. 60N |
| Rewinding diameter | 250mm; 9.8 inch |
| Winding accuracy | ±0.5mm |
| Installation size | L1600mm*W900mm*H1000mm; L63*W35.4*H39.4 inch |
| Weight | About 1t |
Reviews (0)
Why Choose Us
Related products
Automatic Tunnel Vacuum Drying System
This machine is used for batch baking production of lithium-ion batteries, and runs fully automatically. Adopting international advanced vacuum tunnel baking technology to ensure the consistency of battery baking, taking into account clean production and easy inspection and maintenance of equipment.
Specialized assembly line: heating, constant temperature, and cooling are divided into independent functional sections, and each functional section has always maintained a state to achieve high vacuum, high temperature uniformity and low dew point, which greatly improves the performance parameters of lithium batteries, while greatly Reduce energy consumption.
Automation: Automatic connection of upper and lower procedures to achieve dynamic vacuum operation, thereby realizing automation and intelligent large-scale production.
MSK-510M Cylindrical Battery Sealing Machine
Product introduction:
MSK-510M cylindrical battery sealing machine is driven by hydraulic jack to realize the packaging process for cylindrical batteries. The standard mold can be used to seal the 18650 battery. After changing the mold, it can seal other sizes of cylindrical batteries (such as 26650, etc.).
MSK-540 Automatic Trimming Machine
Product introduction:
MSK-540 automatic trimming machine can realize continuous precision trimming of rolled materials with a width of less than 300mm. The width can be adjusted steplessly, especially suitable for single precision slitting occasions where the width often needs to be adjusted. The equipment can be widely used in lithium battery, metal foil, optical film and other functional film industries.
MSK-AFA-L800 800mm Cast Coating Machine (for Making 18650 Cylindrical Batteries)
Product introduction:
MSK-AFA-L800 is a 800mm long cast coater. It contains a vacuum chuck and an oil-free vacuum pump. It can be used to make long thick films with a micron adjustable blade. With a unique automatic propulsion device, it can produce a smooth coating on any material within a range of 180mm width and 600 length. It is an ideal tool for low-cost research and development of 18650 battery electrode materials.
Reviews
There are no reviews yet.