Have you ever experienced the distress due to traffic jams on snowy roads when the experiment is done immediately;

Have you ever experienced the distress of the laboratory glove box forgetting to turn off the lighting;

Have you ever experienced that with the arrival of cold air at night, the pressure in the glove box increases, and you are not in trouble;

Have you ever tried to find out whether the glove box is abnormal and distressed when you travel on business;

1. Remote control

Warmth 1: There is a traffic jam on the snowy day, but you need to do an experiment immediately, check the operating status of the glove box through your mobile phone, and adjust the atmosphere in the box to prepare for the experiment;

Warmth 2: Leave the laboratory and forget to turn off the lighting, no need to return to the laboratory, just use the mobile phone to turn off;

Warm three: cold air comes and the temperature is low at night, and the pressure change of the glove box increases. The upper and lower pressure can be set through the mobile phone;

Warm Four: Check the operating conditions and abnormalities of the glove box at any time through the mobile phone when traveling;

2. Intelligent warning

During the experiment, do you encounter situations where you forget to record the values ​​of various parameters in the box?

When the glove box is regenerating, do you always pay attention to the regeneration situation?

Warm one: During the experiment, the system will record the real-time value of each parameter in the box, which is convenient to analyze the experimental results in combination with different experimental environments;

Warmth 2: The system analyzes based on your usage data when you need to do regeneration, when to replace consumables such as pump oil, activated carbon, molecular sieve, etc., and push the information to your phone;

Warmth three: When the glove box warning prompts that regeneration is needed, the regeneration situation can be checked through the mobile phone, without waiting on site;

3. Automatic antechamber door

Have you ever experienced opening the antechamber door and the air in the antechamber entering the glove box, causing the experiment environment inside the box to fail?

Have you ever experienced that the internal and external antechamber doors are often not closed tightly, causing leakage and adversely affecting the experiment in the box?

Warm one: In the automatic mode, when the glove box needs to be fed and discharged, the inner and outer doors of the big antechamber will be opened in sequence. The user only needs to put the materials into the big antechamber after the door of one side is opened, and then wait for the door of the other side After opening, you can take out the material. During the whole process, the antechamber door is automatically opened and closed, which is very convenient.

Warmth 2: At the same time, a sensor is installed on the antechamber door. When the antechamber door starts to close, if the user’s hand reaches near the antechamber door, the antechamber door action will immediately change and open, and the user does not need to worry about being caught by the antechamber door.

With Etelux’s smart glove box, these are not problems!