Do’s and Don’ts of Glove Box Maintenance and Cleaning to Remember

In the maintenance and cleaning of the glove box, the following precautions are critical, the slightest negligence may affect the performance of the glove box or even cause safety hazards.

First, safety protection is the first

1. Before starting maintenance and cleaning, be sure to wear appropriate personal protective equipment, such as protective glasses, gloves and masks. This can effectively protect you from potential harm during operation.
2. Make sure to turn off the power and gas supply to the glove box before operation to avoid the risk of electric shock or gas leakage.

Second, the choice of cleaning supplies need to be careful

1. Should use cleaning supplies designed specifically for the glove box, or choose not to produce static electricity, will not volatilize harmful gases and no residual cleaning agent. Avoid the use of strong acid and alkali components of the cleaner, so as not to corrode the internal components of the glove box.
2. For wiping fabrics, choose soft, hairless and absorbent material to prevent scratching the surface of the glove box or leave fiber residue.

Third, the operation specification to follow

1. Operate in accordance with the glove box manual and maintenance guide, do not arbitrarily change the steps or omit key links. When disassembling certain parts, follow the specified order and method to avoid unnecessary damage.
2. During the cleaning process, the action should be gentle to avoid deformation or damage to the parts caused by too much force.

IV. Handling of gloves

1. Regularly check and replace the gloves, if found broken or aging gloves, should be replaced in time. Damaged gloves may lead to external pollutants into the glove box, affecting the results of the experiment or product quality.
2. Remove the gloves should be properly handled to avoid contact with other pollutants.

V. Parts inspection and maintenance

1. In the maintenance process, carefully check the various components of the glove box, such as seals, filters, pipes, etc.. For worn or damaged parts, replace them in time to ensure the normal operation and sealing performance of the glove box.
2. When replacing parts, use original or certified accessories to ensure their quality and compatibility.

VI. Inspection after cleaning

After completing the cleaning and maintenance work, carry out a comprehensive inspection.

1. Confirm that all parts have been properly installed and tightened.
2. Turn on the power supply and gas supply, check the operation status of the glove box and whether the parameters are normal.

The maintenance and cleaning of the glove box need to be taken seriously, strictly comply with the precautions to ensure the long-term stable operation of the glove box and the use of safety.