Assembly Movable and Multi-functional Positive-negative Pressure Covid-19 Self-service Collection Station

How do I Clean the Glove Box Water Probe?

Reasons for cleaning the water box of the glove box: If the water probe is not cleaned for a long time, some dirt will adhere to the surface, which will affect the detection. The cleaning steps are as follows: ① Close the cycle and analyzer; ② Set the working pressure to +5 to + 8mbar; ③Remove the water probe and blindly cover the air outlet with a blind plate; ④Unscrew the metal protective cover at the front of the probe, wash it with deionized water, dry it with dust-free paper, and finally moisten the probe with dust-free paper dripped with cleaning solution, apply evenly; ⑤ Put it back in place, turn on the cycle, turn on the analyzer after 1 hour, and return to normal level after half an hour.…

Etelux Provides Components to Build ‘Phone Booth’ , Protecting Health Care Workers During Covid-19 Tests

1.Simple and convenient disinfection. Infrared disinfection device installed inside, the station could be self-sevice disfected before woking and make sure sterile and hygiene. After collection, only need to put the touched medical gloves enter into the disinfectant to disinfect outside, which greatly reduce the frequency and time of disinfection and are helpful to defect much more people in short time.
2. Differencial pressure of inside and outside. Collection station keep higher pressure inside than outside in positive pressure, which could defend the splash get inside and do not need to disinfection inside every time.
3.Arm holes collection. Medical care personnel could collect samples by strech out of the special arm holes and see through the visible quarantine glasses, and directly put the samples in the number boxes after collecting, which greatly readuce the contact area and avoid the risk of infection by touching and breath.
4.Convenient and movable defection. Designed by assembly , station could quicly disassembly and packed to transportation. four-pulley wheel at the bottom are helpful to move and transformation to the designated places to work and greatly raise the detection efficiency.
5.Dimensions:  413″x413″x984″(1050mm x 1050mmx2500mm)

Etelux Ultra-capacity /Lithium Battery Oven Integrated Machine

Oven and glove box The oven is equipped with one or more shifts of production materials at a time, and is baked and dehydrated; Automatic material transfer in the oven After the oven material baking process is completed, it is transferred to the glove box cooling area for cooling at a time; After the cooling is completed, the material is taken by the automatic feeding robot and transferred to the processes of liquid injection, penetration, standing, sealing, etc. These processes are automatic production processes; After the above operation is completed, exit the warehouse through a large warehouse; After all materials are transferred to the glove box, close the door with the glove box, open the outer door, reload the material and proceed to the next shift of the material oven…